Huawei RH8100 V3 - Page 252

No. Description BOM Number
3 SAS HD cable (Port B-Port B) for connecting
the hard disk backplane to the RAID controller
card
04050905
If the RH8100 V3 is congured with two RAID controller cards, the cable
connections between the RAID controller cards and the hard disk backplane are
shown in Figure 5-121.
Figure 5-121 Cable connections (2)
No. Description BOM Number
1 Signal cable for connecting the hard disk
backplane to the front I/O module
04051340
2 SAS HD cable (Port A-Port A) for connecting
the hard disk backplane to the RAID controller
card
04050905
3 SAS HD cable (Port B-Port B) for connecting
the hard disk backplane to the RAID controller
card
04050905
4 Power cable for connecting the hard disk
backplane to the front I/O module
04150997
RH8100 V3 Server
User Guide 5 Removing and Installing Parts of the RH8100 V3
Issue 30 (2019-12-19) Copyright © Huawei Technologies Co., Ltd. 242