Documents
You can change an iBMC user password on the iBMC WebUI or CLI. The following
describes how to change a user password on the iBMC WebUI. For details about
how to change a user password on the iBMC CLI, see the
Huawei Rack Server
iBMC User Guide
.
Procedure
Step 1 On the menu bar of the iBMC WebUI, choose
Cong. In the navigation tree,
choose User Settings.
The User Settings page is displayed, as shown in Figure 7-7.
If Password Complexity Check is set to Enable, the system performs the password
complexity check when you change a user password.
Figure 7-7 User Settings
Step 2 Click for the user whose password needs to be changed.
The area for modifying user information is displayed below, as shown in Figure
7-8.
RH8100 V3 Server
User Guide 7 Conguring the RH8100 V3
Issue 30 (2019-12-19) Copyright © Huawei Technologies Co., Ltd. 315
To Next Page
Loading...
