Huawei RH8100 V3 - Page 121

● You have installed a CPU on the compute module to be installed. For details,
see 5.2.6 Installing a CPU.
Data
● You have obtained the cabinet number and chassis number of the RH8100 V3.
● You have located the RH8100 V3 based on the preceding information, and
labeled its panel to prevent misoperations.
● You have determined the position on the RH8100 V3 for installing a compute
module.
Tools
● ESD gloves
● Packaging materials, for example, an ESD bag
Hardware
Spare compute module
Procedure
Step 1 Wear an ESD wrist strap or ESD gloves. For details, see 1 Safety Instructions.
Step 2 Take the spare compute module out of the ESD bag, and install a CPU of the
required model on the compute module.
Step 3 Insert the compute module into the slot while holding the ejector levers on the
compute module. See step (1) in Figure 5-2.
Step 4 Lower the ejector levers on the compute module. See step (2) in Figure 5-2.
Figure 5-2 Installing a compute module
RH8100 V3 Server
User Guide 5 Removing and Installing Parts of the RH8100 V3
Issue 30 (2019-12-19) Copyright © Huawei Technologies Co., Ltd. 111