Use the Intelligent Computing Compatibility Checker to obtain information
about the precautions and accessories for installing the GPU card.
A dedicated PCIe riser card is required for installing a GPU card. If the PCIe riser
card to be installed is not dedicated for GPU cards, contact Huawei to deliver a
dedicated card.
Scenarios
Install a PCIe card if the original one has failed.
Prerequisites
Conditions
● You have powered
o the RH8100 V3. For details, see 6.2 Powering O the
RH8100 V3. Then you have removed all power cables from the server.
● You have removed the front I/O module from the RH8100 V3. For details, see
5.5.1 Removing the Front I/O Module.
● You have removed the riser card from the RH8100 V3. For details, see 5.5.5
Removing a Riser Card.
Data
● You have obtained the cabinet number and chassis number of the RH8100 V3.
● You have located the RH8100 V3 based on the preceding information, and
labeled its panel to prevent misoperations.
● You have determined the position on the RH8100 V3 for installing a PCIe card.
Tools
● ESD gloves
● Packaging materials, for example, an ESD bag
Hardware
Spare PCIe card
Procedure
Step 1 Wear an ESD wrist strap or ESD gloves. For details, see 1 Safety Instructions.
Step 2 Take the spare PCIe card out of its ESD bag.
Step 3 Insert the PCIe card into a PCIe slot. See step (1) in Figure 5-45.
Step 4 Close the PCIe card latches. See step (2) in Figure 5-45.
Step 5 Close the
bae outside the PCIe card. See step (3) in Figure 5-45.
RH8100 V3 Server
User Guide 5 Removing and Installing Parts of the RH8100 V3
Issue 30 (2019-12-19) Copyright © Huawei Technologies Co., Ltd. 162
To Next Page
Loading...
