Huawei RH8100 V3 - Page 33

Name Type Qua
ntity
Single-
System
Mode
Dual-
System
Mode
Description
iBMC
manag
ement
networ
k port
RJ45 1 Unavailab
le
Unavailab
le
In dual-system mode, the
iBMC management network
port of HFC-1 is unavailable
and the network cable does
not need to be connected. But
the iBMC of HFC-1 still works
and can be accessed through
the iBMC management
network port of HFC-2.
Serial
port
RJ45 1 Unavailab
le
Available Three-pin serial port. The
default baud rate is 115200
bits/s.
In dual-system mode, this
serial port is used as the
system serial port by default.
You can set it as the iBMC
serial port on the iBMC CLI.
In single-system mode, this
serial port is unavailable.
Networ
k port
- - ● Availa
ble for
an
RH810
0 V3
with
eight
CPUs
● Unavai
lable
for an
RH810
0 V3
with
four
CPUs
Available The type and quantity of
network ports vary according
to the congured LAN on
motherboard (LOM) type.
RH8100 V3 Server
User Guide 2 About the RH8100 V3
Issue 30 (2019-12-19) Copyright © Huawei Technologies Co., Ltd. 23