Huawei RH8100 V3 - 10.2 Contacting Technical Support

Category Parameter Description Value Example
DHCP Indicates
whether the
DHCP function is
enabled.
NOTE
You can set the
static IP address
of the
management
network port only
after the DHCP
function is
disabled.
Value: ON and
OFF
–
means DHCP
function is
enabled.
–
means DHCP
function is
disabled.
Setting method:
– Tap
to enable the
DHCP
function.
– Tap
to disable the
DHCP
function.
OFF
RH8100 V3 Server
User Guide 9 Common Operations
Issue 30 (2019-12-19) Copyright © Huawei Technologies Co., Ltd. 358