Sensor Description Remarks
System Notice Hot restart notice.
Collect error
information for the
fault diagnosis
program.
System Error System suspension or
restart. Check the
background logs.
NIC
N
Status NIC health status
RAID
N
PCIe ERR RAID controller card
health status
PCH Status PCH chip fault
diagnosis health status
PS Redundancy Redundancy failure due
to PSU removal
BMC Boot Up BMC startup event
SEL Status SEL full or clearing
events
Op. Log Full Operation log full or
clearing events
Sec. Log Full Security log full or
clearing events
CPU NUM
Cong
The number of CPUs
does not meet the
requirement.
CPU Match The CPU type does not
match.
HPC Match The type of the HPC1 is
dierent from that of
the HPC2.
HPC
N
Type The HPC type does not
match the CPU board
or CPU.
SSD Disk
N
Temp SSD Temperature
BMC Time
Hopping
Time hopping
NTP Sync Failed NTP synchronization
failure and recovery
events
RH8100 V3 Server
User Guide A Appendix
Issue 30 (2019-12-19) Copyright © Huawei Technologies Co., Ltd. 376
To Previous Page
Loading...
