The following tools are available:
● Protective gloves
● ESD gloves
● ESD wrist strap
● Box cutter
Procedure
Step 1 Check whether the package is in good condition.
If the package is damaged (for example, the package is soaked or deformed, or the seals or
pressure-sensitive adhesive tape is unsealed), ll in the
Cargo Problem Feedback Form
.
Step 2
To avoid personal injury or equipment damage, be careful when using a box
cutter.
Use a box cutter to cut the pressure-sensitive adhesive tape on the package, and
open the package.
Step 3 Based on Figure 3-1 and Table 3-2, check that the components are in good
condition, without defects such as oxidation, chemical corrosion, missing
components, or other damage incurred during transport.
RH8100 V3 Server
User Guide 3 Installing the RH8100 V3
Issue 30 (2019-12-19) Copyright © Huawei Technologies Co., Ltd. 82
To Next Page
Loading...
