v 1.4 — September 2015 Altanium Neo2
6 Controller Lifting Instructions
1. Place each of the webbed straps under the controller. See the table for the correct strap
lengths.
a. For single stack controllers, the webbed straps go under the equipment from left to
right.
b. For double and triple stack controllers, the webbed straps go under the equipment
from front to back.
2. Bring the straps up and above the Altanium controller and attach them to the lifting
device.
a. Make sure the straps are positioned between the caster wheels and the retaining
brackets under the base of the controller.
Altanium
Controller
Webbed Straps Rated
2903 kg (6400 lb)
Ratchet Strap
Lifting Device
(Lifting Ability)
Single Stack Two, 2.44 m x 25.4 mm
(8 ft x 1 in.)
One, 1.52 m (5 ft) 227 kg (500 lb)
Double Stack Two, 3.66 m x 25.4 mm
(12 ft x 1 in.)
One, 1.83 m (6 ft) 454 kg (1000 lb)
Triple Stack Two, 3.66 m x 25.4 mm
(12 ft x 1 in.)
One, 2.44 m (8 ft) 907 kg (2000 lb)
Figure 1-1 Attaching Straps to Lifting Device
To Next Page
Loading...
