v 1.4 — September 2015 Altanium Neo2
8 Controller Lifting Instructions
6. Tighten the ratchet strap.
7. Use the lifting device to slowly lift the controller off the ground a few inches.
8. Check the webbed and ratchet straps to ensure the controller will not tip.
9. Move the controller to the new location.
10. At the new location, slowly lower the controller to the ground.
11. Remove the ratchet straps, cushioning material and webbed straps from the controller.
Figure 1-4 Protecting the Controller Finish
To Next Page
Loading...
