Security Item Descriptions 29
User Guide v 1.4 — September 2015 Security
Print Screen Enables an operator to access the Print screen to print data to a file and
store it to a USB disk.
Standby Timers Enables the operator to adjust the Standby timers in the System screen.
Boost Timers Enables the operator to adjust the Boost timers in the System screen.
Manual ART Enables the operator to ART a zone or group of zones.
Global Power Limit Enables the operator to assign a system wide power limit value to all
zones. Power Limiting is defined in percentage (0%-100%) and is used to
prevent the controller from delivering full power to a heater.
System Screen Enables the operator to access the System screen. This screen is used to
make changes to system wide parameters.
Run Mold Test Enables the operator to run the mold test.
Options Screen Enables an operator to access the Options screen. This screen is used to
set the Standby and Boost timers.
Time / Date Change Enables the operator to set the Time and Date from the System screen.
Language Screen Enables the operator to access the Languages screen to change the
language displayed on the interface.
Error log Enables the operator to view the error log page. The error log displays
the last 100 errors that have occurred in the system.
Feature Description
To Next Page
Loading...
