Hypertherm Powermax65 SYNC Troubleshooting Guide

Powermax65/85/105 SYNC Troubleshooting Guide 810430 11
Before You Begin
This manual helps you with the troubleshooting of fault code conditions and related system
problems. The information in this manual is for qualified service technicians only.
If additional assistance with repairing the system is necessary:
1. Get the serial number for your system from the data plate that is on the rear panel of the plasma
power supply.
2. Contact your Hypertherm distributor or authorized repair facility.
3. Contact the nearest Hypertherm office shown in the front of this manual.
For related information, refer to the following documents:
 Powermax65/85 SYNC Service Parts and Procedures Guide (810440)
 Powermax105 SYNC Service Parts and Procedures Guide (810450)
 SmartSYNC Torches Service Parts and Procedures Guide (810460)
 Powermax65/85/105 SYNC Operator Manual (810470)
 Powermax65/85/105 SYNC Mechanized Cutting Guide (810480)
Technical documentation is available at www.hypertherm.com/docs.

Technical documentation is current as of the date of its release.
Subsequent revisions are possible. Refer to www.hypertherm.com/docs
for the most recent revisions of released documents.

Hypertherm Powermax65 SYNC Specifications

General

Brand	Hypertherm
Model	Powermax65 SYNC
Category	Welding System
Language	English