Hypertherm Powermax65 SYNC Troubleshooting Guide

Access Service Information and Settings
6
Powermax65/85/105 SYNC Troubleshooting Guide 810430 153
Default feature configuration
Go to the Feature Configuration screen (FEATURE CONFIG) to change system settings.
Changing these fields from their default settings is recommended only for experienced
operators.
Changing one of these fields from the default setting causes the non-default
configuration icon (at right) to show on the status screen.
By default, this screen is locked. To change any of the settings on this screen, you must
first unlock the screen using the icon.
1. Push and hold for 2 seconds to go to the main menu screen.
2. Select on the main menu screen.
3. Select to go to the FEATURE CONFIG screen.
4. Turn the adjustment knob to go to the field.
5. Push to select the field.
6. Turn the adjustment knob to set the field to the unlock position: .
7. Push to apply the unlock setting.
8. Turn the adjustment knob to go to another field on the screen.
9. Push to select the field.
10. Turn the adjustment knob to change the value for the selected field.
11 . Push to keep the new value.

Hypertherm Powermax65 SYNC Specifications

General

Brand	Hypertherm
Model	Powermax65 SYNC
Category	Welding System
Language	English