Hypertherm Powermax65 SYNC - Remove Fault Code Conditions; Operational Faults (0-Nn-N)

Troubleshooting for Fault Codes
3
42 810430 Troubleshooting Guide Powermax65/85/105 SYNC
Remove fault code conditions
Refer to the following tables to identify and troubleshoot each fault condition.

A label with descriptions for many common fault codes comes with the
system. Put the label on the plasma power supply or near your work area
for reference.
Operational faults (0-nn-n)
Fault codes in the 0-nn-n format identify operational faults. These faults do not show on the Power
Supply Log screen.
An operational fault code can be for a notification or for a condition that stops the cutting process.
Hypertherm recommends that you do the steps in the following table for all fault codes that occur.
Torch Communications – This icon identifies communication faults that occur
between the SmartSYNC torch and the DSP PCB in the plasma power supply.