Access Service Information and Settings
150 810430 Troubleshooting Guide Powermax65/85/105 SYNC
7. Push to go back to the status screen. The STA and XT fields now show on the screen.
Serial communications parameters
Use the CNC Interface Settings screen (CNC INTERFACE) to set parameters for serial
communication.
1. Select on the main menu screen.
2. Select to go to the CNC INTERFACE screen.
3. Turn the adjustment knob to go to the field you want to change.
4. Push to select the field.
5. Turn the adjustment knob to change the value in the field.
To Next Page
Loading...
Need help?
General
