Access Service Information and Settings
Powermax65/85/105 SYNC Troubleshooting Guide 810430 141
– This field shows the total number of pilot arc starts that the plasma power supply has done
while there was no communication between the plasma power supply and the torch or
cartridge. For example, the value in this field includes pilot arc starts when the system is in an
0-98-n fault condition or when the system is set to basic mode.
– This field shows the total number of pilot arc starts that the plasma power supply has done
while an unrecognized type of cartridge was used.
In basic mode, the system continues to record data for field 1 and 6. For
all other fields, the system does not record data in basic mode.
To Next Page
Loading...
