Hypertherm XPR300 - Page 371

Parts List
9
XPR300 Instruction Manual 809480 371
Rear compartment of the plasma power supply
229711 XPR300 wire harness – 1
223399
CAN cable 0.5 m (1.6 ft) (not shown)
Located between the control PCB and
Chopper 2.
–1
223400
CAN cable 1 m (3.3 ft) (not shown)
Located between Chopper 2 and Chopper
1.
– 1
Part number Description Designator Quantity
1 229697
Inrush contactor assembly: 80 A, IEC AC-3,
3-phase, 120 VAC
IR_CON 1
2 209274 Inrush resistor assembly, 2  X 3 – 1
3 229033
Terminal block 600 V, 200 A (200 V, 208 V,
220 V, 240 V, 380 V, 400 V, 415 V)
TB1 1
4 029316
Terminal block 600 V, 140 A (380 V, 440 V,
480 V, 600 V)
Part number Description Designator Quantity
1
2
3
4
5
200 V, 208 V, 220 V, 240 V plasma
power supplies
380V, 400V, 415V, 440V, 480V,
600 V plasma power supplies
6
6