8.6 How to replace components
8-28
8. Maintenance and Inspection
9) Put on a new motor cover assembly (top), and put on the connectors on Motor Cable
[B], Encoder Cable [C] and Brake Cable [D] for the brake-equipped type.
Store cables to the space at the right bottom in the view from the end cover side.
Power I/O connector
Encoder cable [C]
(Ferrite core on PCB side)
Motor cable [B]
Teaching port
Motor power supply connector
Storage of Cables
Cable Storage Space
The space at the right bottom in
the view from end cover side.
To Next Page
Loading...