36 Modem commands
&V The modem answers with the active profile and the phone numbers stored in NVRAM
&W0 Saves the current register setting as profile 1
&W1 Saves the current register setting as profile 2
&F&W0&W1 Returns a modem profile to the original factory setting
+++
Escape sequence
Return to command state
+FCLASS=?
Shows which class of fax commands the modem supports. If the modem answers:
0,1 it supports Class 1 commands
0,1,2 it supports Class 1 or Class 2 commands
0,2 it supports Class 2 commands
Table 3: Modem commands (Continued)
Code/Command Function
bi2gntce.bk : bi2giod.doc Page 36 Saturday, June 3, 1995 6:54 AM
To Next Page
Loading...
