Icom IC-7800

7-8
7
VOICE RECORDER FUNCTIONS
D One-touch playing
The previously recorded audio in channel 1 can be
playbackwithoutselectingVoiceRecorderscreen.
[PLAY]
➥ Push [PLAY] momentarily to playback the last 5 sec-
onds of the previously recorded audio.
 •“ ” indicator appears.
 •Playbackisterminatedautomaticallyafter5seconds.
 •Theplaybacktimeperiodcanbesetinvoicesetmode.
(p. 7-13)
➥ Hold down [PLAY] for 1 second to playback all of
the previously recorded audio.
 •“ ” indicator appears.
 •Playbackisterminatedautomaticallywhenallofthere-
corded contents in the channel are played.
■ Protect the recorded contents
The protect function is available to protect the
important recorded contents from accidental erasing,
such as over-record, etc.
[F-1•Y] [F-2•Z] [F-4•PROTECT]
q Push [EXIT/SET] several times to close a multi-func-
tion screen, if necessary.
wPush[F-2•VOICE]todisplaytheVoiceRecorder
menu.
ePush [F-1•PLAY] to call up the Voice Recorder
screen.
 •Previouslyselectedscreen,TXorRXmemory,isdis-
played. If the TX memory channel (T1–T4) appears,
push[F-7•T/R]toselectRXmemorychannel.
rPush[F-1•Y]or[F-2•Z] to select the desired voice
memory.
tPush[F-4•PROTECT]toturntheprotectfunction
ON or OFF.
 •“ ” indicator appears when the contents is protected.
yPush[EXIT/SET]twicetoexittheVoiceRecorder
menu.
■ Erasing the recorded contents
The recorded contents can be erased independently
by channel.
[F-1•Y] [F-2•Z][F-5•CLR]
q Perform the steps q to e as “■ Protect the re-
corded contents” above.
wPush[F-1•Y]or[F-2•Z] to select the desired voice
memory to be erased.
eHolddown[F-5•CLR]for1secondtoerasethecon-
tents.
 •Push[F-4•PROTECT]toreleasetheprotectioninad-
vance if necessary.
rPush[EXIT/SET]twicetoexittheVoiceRecorder
menu.
■ Playing the recorded audio (continued)