Icom IC-7800

7-12
■ Voice set mode
Sets the automatic monitor function, short play and
normalrecordingtimesforVoiceRecorder.
[F-2•Z][F-1•Y]
[EXIT/SET] Main dial[F-4•DEF]
q Push [EXIT/SET] several times to close a multi-func-
tion screen, if necessary.
wPush[F-2•VOICE]todisplaytheVoiceRecorder
menu.
ePush[F-7•SET]toselectvoicesetmodescreen.
rPush[F-1•Y]or[F-2•Z] to select the desired item.
t Rotate main dial to set the desired condition or
value.
 •Holddown[F-4•DEF]for1secondtoselectthedefault
condition or value.
y Push [EXIT/SET] to exit the voice set mode screen.
7
VOICE RECORDER FUNCTIONS
SelectVOICE-RootorVOICE-PLAYasthemenuthat
appearsfirstafterpushing[F-2•VOICE].
•VOICE-Root :Thevoicemenuappearsfirst.
•VOICE-PLAY :EithertheRXorTXvoiceRecorder
screen appears first.
D Transmit level setting
[F-6•TX LEV.] [EXIT/SET] Main dial
[F-7•T/R]
qCalluptheVoiceRecorderscreenasdescribedas
above.
wPush [F-6•TX LEV.] to select the voice memory
transmit level set condition.
ePushthedesiredmemorychannelswitch,[F-1•T1]
to[F-4•T4],momentarilytotransmitthecontents.
 •Thetransceiverautomaticallytransmits.
 •“
” indicator appears and the memory timer
counts down.
r Rotate the main dial to adjust the transmit voice
level.
•Holddown[F-7•DEF]for1secondtoselectthedefault
condition.
tPush[EXIT/SET]toreturntotheVoiceRecorder
screen.
Turn the automatic monitor function for recorded
audio contents transmission.
•ON :Monitors transmitting audio automatically
when sending a recorded audio.
•OFF :Monitorstransmittingaudioonlywhenthe
monitor function is in use.
■ Sending a recorded message (continued)