Icom IC-7800

9-7
■ Setting select memory channels
D Setting in scan screen
q Push [EXIT/SET] several times to close a multi-func-
tion screen, if necessary.
w Select memory mode.
ePush[F-5•SCAN]toselectthescanscreen.
r Select the desired memory channel to set as a se-
lect memory channel.
 •[Y]/[Z] keys and direct keypad selections can be used.
tPush[F-3•SELECT]severaltimestosetthemem-
ory channel as a select memory ★1, ★2, ★3 or
not.
y Repeat steps r to t to program another memory
channel as a select memory channel, if desired.
u Push [EXIT/SET] to exit the scan screen.
D Setting in memory list screen
q Push [EXIT/SET] several times to close a multi-func-
tion screen, if necessary.
wPush[F-4•MEMORY]toselectmemorylistscreen.
eRotatethemaindialwhilepushing[F-1•ROLL]or
[F-2•SET]toselectthedesiredmemorychannel.
 •[Y]/[Z] keys and direct keypad selections can be used.
rPush[F-3•SELECT]severaltimestosetthemem-
ory channel as a select memory ★1, ★2, ★3 or
not.
t Repeat steps e to r to program another memory
channel as a select memory channel, if desired.
y Push [EXIT/SET] to exit the memory list screen.
D Erasing the select scan setting
q Push [EXIT/SET] several times to close a multi-func-
tion screen, if necessary.
wPush[F-4•MEMORY]toselectmemorylistscreen,
orpush[F-5•SCAN]toselectscanscreen.
eHolddown[F-3•SELECT]for1secondtodisplay
memory select all clear window.
r Push one of the following keys to clear all select
scan setting.
 [F-1•★1] : Clears all ★1 setting.
 [F-2•★2] : Clears all ★2 setting.
 [F-3•★3] : Clears all ★3 setting.
 [F-4•★1,2,3] : Clears all select setting.
t Push [EXIT/SET] to exit the memory list screen.
9
SCANS