Icom IC-7800

4-16
D RTTY memory transmission
Pre-set characters can be sent using the RTTY memory.
Contents of the memory are set using the edit menu.
[F-7•1–4/5–8][F-1•RT1]–[F-4•RT4]
[F-1•RT5]–[F-4•RT8]
[EXIT/SET]
qDuringRTTYmodeoperation,push[F-3•DECODE]
to select RTTY decode screen.
wPush [F-4•TX MEM] to select RTTY memory
screen.
ePush [F-7•1–4/5–8] to select memory bank
thenpushoneofthefunctionkeys([F-1•RT1]to
[F-4•RT4]or[F-1•RT5]to[F-4•RT8]).
 •Whennokeyboardisconnected,theselectedmemory
contents will be transmitted immediately.
 •Whenakeyboardisconnected,thememorycontents
will be transmitted immediately when function key is
pushed, or transmitted after [F12] on the connected
keyboard is pushed, depending on auto transmission/
reception setting (see below).
•Thetransmissiondate,time,receptiondateand/ortime
may be displayed in RX contents screen, depending on
setting.
✔ For your convenience
When an external keypad is connected, one of RT1 to
RT4 RTTY memory contents can be transmitted while
the RTTY decoder screen is selected in RTTY mode.
See pages 2-6, 2-10 and 12-20 for details.
D Automatic transmission/reception setting
[F-6•AUTO TX] [F-7•RT1..RT8][EXIT/SET]
qDuringRTTYmodeoperation,push[F-3•DECODE]
to select RTTY decode screen.
wPush [F-4•TX MEM] to select RTTY memory
screen,thenpush[F-6•EDIT]toselectRTTYmem-
ory edit screen.
 •RTTYmemorycontentsoftheChannel1(RT1)isse-
lected.
ePush[F-7•RT1..RT8]severaltimestoselectthede-
sired RTTY memory.
rPush[F-6•AUTOTX]severaltimestoselectthede-
sired condition as follow.
 •AUTOTX/RX:Automatically transmits the se-
lected memory and returns to re-
ceive after the transmission.
 •AUTOTX :Automatically transmits the se-
lected memory. To return to re-
ceive, push [F12] on the key-
board.
 •AUTORX :Push [F12] on the keyboard to
transmit the selected memory. Au-
tomatically returns to receive after
the transmission.
 •Noindication :Push [F12] on the keyboard to
transmit the selected memory and
push [F12] again to return to re-
ceive.
t Push [EXIT/SET] to exit RTTY memory edit condi-
tion.
4
RECEIVE AND TRANSMIT
NOTE: The transceiver always functions as the
“AUTO TX/RX” setting when no keyboard is con-
nected.