Icom IC-7800

11-2
■ Time set mode
[EXIT/SET][F-4•DEF]
[ABC]/[abc] [123]/[Symbol] [F-3•Ω ≈][F-5•EDIT]/[F-5•SET]
[F-1•Y] [F-2•Z] Main dial
The IC-7800 has a built-in calendar and 24-hour clock
with daily power ON/OFF timer functions. Before oper-
ating these timer functions, set the current date and
time.
q Push [EXIT/SET] to close multi-function screen, if
necessary.
wPush[F-7•SET]toselectsetmodemenuscreen.
ePush[F-4•TIME]toselecttimesetmode.
rPush[F-1•Y]or[F-2•Z] to select the desired item.
t Rotate the main dial to set or select the desired
value or condition.
y Push [EXIT/SET] to exit time set mode.
11
CLOCK AND TIMERS
Sets the date.
z
Push[F-3•Ω ≈] to select between the year and the
month/day, then rotate the main dial to select them.
 •Thedatesettingand“DATE-setPush[SET]”indication
blink.
xPush[F-5•SET]tosetthedate.
Sets the local time.
z Rotate the main dial to set the local time.
 •Thetimesettingand“TIME-setPush[SET]”indication
blink.
xPush[F-5•SET]tosetthetime.
Turns the clock 2 indication ON or OFF.
The clock 2 is convenient to indicate the UTC or other
country’s local time, etc.
•ON  :Theclock2isdisplayedbelowthelocal
time indication.
•OFF :Theclock2doesnotdisplay.
Sets the desired off-set time period for clock 2 display
within –24:00 to +24:00 in 5 min. steps.
•Holddown[F-4•DEF]for1secondtoselectthedefault
value.
Sets the desired 3-character name for clock 2.
Capital letters, small letters, numerals, some symbols
(!#$%&¥?"’`^+–✱ / . , : ; = < > ( ) [ ] { } | _
~
@)
and spaces can be used.
zPush[F-5•EDIT]toselectthenameeditcondi-
tion.
 •Thecursorunderthe1stcharacterblinks.
x Push [ABC], [abc], [123] or [Symbol] to select the
character group, then rotate the main dial to select
the character.
 •Push[ABC]or[abc]totogglecapitalandsmallletters.
 •
Push [123] or [Symbol] to toggle numerals and symbols.
 •Push[F-1•Ω]or[F-2•≈] for cursor movement.
•Push[F-3•DEL]todeletetheselectedcharacter.
 •Push[F-4•SPACE]toinputaspace.
 •Pushing the transceiver’s keypad, [0]–[9], can also
enter numerals.
c Push [EXIT/SET] to set the name.