Icom IC-7800

12-29
12
SET MODE
D Load option set mode
Selects file loading condition from All and Select.
(default: Select)
•All :Loadsandsetstheallfollowingcontents.
•Select:Loadsandsetstheselectedcontentsonly.
Selects the antenna memory setting loading condition
YES and NO. (default: NO).
•YES :Loadsandsetstheantennamemory.
•NO :Usetheoriginalantennamemorysetting.
Selects the reference signal setting loading condition
YES and NO. (default: NO).
•YES : Loads and sets the reference signal setting.
•NO :Usetheoriginalreferencesignalsetting.
Selects the Network settings loading condition YES
and NO. (default: NO).
•YES :LoadsandsetstheNetworksettings.
•NO :UsetheoriginalNetworksettings.
SelectstheCI-Vaddresssettingloadingcondition
YES and NO. (default: NO).
•YES :LoadsandsetstheCI-Vaddresssetting.
•NO :UsetheoriginalCI-Vaddresssetting.
Selects memory channel contents and other settings
loading condition YES and NO. (default: YES).
•YES :Loadsandsetsmemorychannelcontents
and other settings.
•NO :Usetheoriginalmemorychannelcontents
and other settings.
Selects the voice TX memory loading condition YES
and NO. (default: YES).
•YES :LoadsandsetsthevoiceTXmemory.
•NO :UsetheoriginalthevoiceTXmemory.
Selects the voice RX memory loading condition YES
and NO. (default: NO).
•YES :LoadsandsetsthevoiceRXmemory.
•NO :UsetheoriginalthevoiceRXmemory.