Icom IC-7800

8-5
■ Frequency transferring
The frequency and operating mode in a memory chan-
nelcanbetransferredtotheVFO.
Frequency transferring can be performed in either
VFOmodeormemorymode.
D Transferring in VFO mode
This is useful for transferring programmed contents to
VFO.
qSelectVFOmodewith[V/M].
w Select the memory channel to be transferred with
[Y]/[Z].
 •Memorylistscreenisconvenientforselectingthede-
sired channel.
 •Memorychannelcontentsappearinthememorychan-
nel readout (below the frequency readout).
 •“--.---.--”appearsiftheselectedmemorychannelisa
blank channel. In this case transferring is impossible.
eHolddown[V/M]for1secondtotransferthefre-
quency and operating mode.
 •Transferredfrequencyandoperatingmodeappearon
the frequency readout.
D Transferring in memory mode
This is useful for transferring frequency and operating
mode while operating in memory mode.
When you have changed the frequency or operating
mode in the selected memory channel:
•Displayed frequency, mode and filter setting are
transferred.
•Programmed frequency and mode in the mem-
ory channel are not transferred, and they remain
in the memory channel.
q Select the memory channel to be transferred with
[Y]/[Z] in memory mode.
 •And,setthefrequencyoroperatingmodeifrequired.
wHolddown[V/M]for1secondtotransferthefre-
quency and operating mode.
 •Displayedfrequencyandoperatingmodearetransferred
totheVFO.
eToreturntoVFOmode,push[V/M]momentarily.
8
MEMORY OPERATION
TRANSFERRING EXAMPLE IN VFO MODE
Operatingfrequency:21.320MHz/USB(VFO)
Contents of M-ch 16 : 14.018 MHz/CW
or
Hold down for 1 second.
Beep
Beep
Beep
TRANSFERRING EXAMPLE IN MEMORY MODE
VFOfrequency  :21.320MHz/USB
Contents of M-ch 16 : 14.018 MHz/CW
Hold down for 1 second.
Beep
Beep
Beep
Programmed contents appear.