Icom IC-7800 - Memory Names; D Editing (Programming) Memory Names; Memory Clearing

8-6
■ Memory names
All memory channels (including scan edges) can be
tagged with alphanumeric names of up to 10 charac-
ters each.
Capital letters, small letters, numerals, some symbols
(!#$%&¥?"’`^+–✱ / . , : ; = < > ( ) [ ] { } | _
~
@)
and spaces can be used.
D Editing (programming) memory names
[F-1•Ω] [F-2•≈] [F-4•SPACE]
[F-3•DEL] Keypad[ABC]/[abc] [123]/[Symbol]
q Push [EXIT/SET] several times to close a multi-func-
tion screen, if necessary.
wPush[F-4•MEMORY]toselectmemorylistscreen.
e Select the desired memory channel.
rPush[F-4•NAME]toeditmemorychannelname.
 •Acursorappearsandblinks.
 •Memorychannelnamesofblankchannelscannotbe
edited.
t Input the desired character by rotating the main dial
or by pushing the band key for number input.
 •Push[ABC]or[abc]totogglecapitalandsmallletters.
  •Push[123]or[Symbol]totogglenumeralsandsym-
bols.
 •Push[F-1•Ω]or[F-2•≈] for cursor movement.
 •Push[F-3•DEL]todeletetheselectedcharacter.
 •Push[F-4•SPACE]toinputaspace.
 •Pushingthetransceiver’skeypad,[0]–[9],canalsoenter
numerals.
y Push [EXIT/SET] to input and set the name.
 •Thecursordisappears.
u Repeat steps e to y to program another memory
channel’s name, if desired.
i Push [EXIT/SET] to exit memory list screen.
■ Memory clearing
Any unnecessary memory channels can be cleared. The
cleared memory channels become blank channels.
[F-5•CLR]
qSelectmemorymodewith[V/M].
wPush[F-4•MEMORY]toselectmemorylistscreen.
e Select the desired memory channel with [Y]/[Z].
rHolddown[F-5•CLR]for1secondtoclearthecon-
tents.
 •Theprogrammedfrequencyandoperatingmodedisap-
pear.
t To clear other memory channels, repeat steps e
and r.
Hold down for 1 second.
Beep
Beep
Beep
(CLR)
8
MEMORY OPERATION