Icom IC-7800 - D Save Option Set Mode

12-28
12
SET MODE
Selects file saving condition from All and Select.
(default: All)
•All :Savesallthefollowingcontents.
•Select:Savestheselectedcontentsonly.
Selects memory channel contents and other settings
saving condition from YES and NO. (default: YES)
•YES :Savesmemorychannelcontentsandset-
tings of miscellaneous (Other) set mode.
•NO :Doesnotsave.
Selects the voice TX memory saving condition from
YES and NO. (default: YES)
•YES :SavesthevoiceTXmemory.
•NO :Doesnotsave.
Selects the voice RX memory saving condition from
YES and NO. (default: NO)
•YES :SavesthevoiceRXmemory.
•NO :Doesnotsave.
D Save option set mode
SelectsfilesavingformatfromNowVerandOldVer.
(default:NowVer)
AdditionalselectionsareavailableforOldVerandin-
dicated in brackets.
For your information:
The current IC-7800 firmware version number can
be confirmed when turning the power ON and is dis-
played in the bottom right corner of the function dis-
play, as shown below.
3.00
Firmware version number is displayed here
•NowVer :Savesthe fileinthe current firmware
version format being used.
•OldVer :Savesthefileinthefirmwareversion
format that is indicated in brackets.