Icom IC-7800 - Setting sleep timer

11-4
■ Setting sleep timer
The sleep timer turns the transceiver power OFF au-
tomatically after passing the set period. The timer can
be set to 5–120 min. in 5 min. steps.
[EXIT/SET]
[F-4•CLR]
[TIMER]
[F-7•SLEEP]/[F-7•SET]
Main dial
q Push [EXIT/SET] several times to close a multi-func-
tion screen, if necessary.
w Hold down [TIMER] for 1 second to select timer set
screen.
ePush[F-7•SLEEP]toselectthesleeptimersetcon-
dition.
 •“–––”blinks.
r Set the desired time period using the main dial.
 •“TIMER–setPush[SET]”blinks.
 •Push[F-4•CLR]toselect“–––”tocancelthesetting.
tPush[F-7•SET]tosetthetime.
 •Push[EXIT/SET]tocancelthesetting.
 •Thetimerindicatorabove[TIMER]switchlightsgreen.
y Push [EXIT/SET] to exit timer set screen.
u The transceiver emits 10 beeps and turns OFF after
the sleep timer period elapses.
 •Thetimerindicatorblinkswhilebeeping.
 •Push[TIMER]momentarilytocancelthesleeptimer,if
desired.
■ Timer operation
[TIMER] [POWER]
q Preset the daily timer as described previously.
w Push [TIMER] momentarily to turn the timer function
ON.
 •Thetimerindicatorabovethisswitchlightsgreenwhen
the timer function is ON.
e Hold down [POWER] for 1 second to turn the power
OFF.
 •Thetimerindicatorlightscontinuously.
r When the set time arrives, the power is automati-
cally turned ON.
t The transceiver emits 10 beeps and turns OFF after
the power-off period elapses.
 •Thetimerindicatorblinkswhilebeeping.
 •Push[TIMER]momentarilytocancelthesleeptimer,if
desired.
The timer action in timer set screen must be se-
lected ON to enable the timer operation, described
in page 11-3 steps r.
11
CLOCK AND TIMERS