12-5
12
SET MODE
■ Level set mode (continued)
Sets the bass level of the receive audio tone in FM
mode from –5 to +5. (default: 0)
Sets the treble level of the receive audio tone in FM
mode from –5 to +5. (default: 0)
Sets the transmission passband width to wide setting
by changing the lower and higher cut-off frequencies.
Lower freq. : 100 (default), 200, 300 and 500 Hz
Higher freq. :
2500, 2700, 2800 and 2900 Hz (default)
Sets the transmission passband width to middle set-
ting by changing the lower and higher cut-off frequen-
cies.
Lower freq. : 100, 200, 300 (default) and 500 Hz
Higher freq. :
2500, 2700 (default), 2800 and 2900 Hz
Sets the transmission passband width to narrow set-
ting by changing the lower and higher cut-off frequen-
cies.
Lower freq. : 100, 200, 300 and 500 Hz (default)
Higher freq. :
2500 (default), 2700, 2800 and 2900 Hz
Sets the voice synthesizer audio output level from 0
to 100% in 1% step. (default: 50%)
Sets the CW side tone output level from 0 to 100% in
1% step. (default: 50%)
Turns the CW side tone output level limiting capabil-
ity from ON or OFF. (default: ON)
Sets the audio level that the audio peak filter is
ON in the CW mode, from 0 to +6 dB in 1dB step.
(default: 0dB)
Sets the beep output level from 0 to 100% in 1%
steps. (default: 50%)
To Next Page
Loading...
