Icom IC-7800 - Page 77

4-27
D PSK decode set mode (continued)
4
RECEIVE AND TRANSMIT
Selects the operating frequency display for time
stamp usage.
NOTE: The frequency won’t be displayed when
“OFF” is selected in “PSK Time Stamp” as
below left.
•ON :Displaystheoperatingfrequency.
•OFF :Nooperatingfrequencydisplay.
Set the text color for received characters.
•ThecolorissetinRGBformat.
•
The set color is indicated in the box beside the RGB scale.
• Push[F-3•Ω ≈] to select R (Red), G (Green) and B (Blue),
and then rotate the main dial to set the ratio from 0 to 255.
Set the text color for transmitted characters.
•ThecolorissetinRGBformat.
•
The set color is indicated in the box beside the RGB scale.
• Push[F-3•Ω ≈] to select R (Red), G (Green) and B (Blue),
and then rotate the main dial to set the ratio from 0 to 255.
Set the text color for time stamp indication.
•ThecolorissetinRGBformat.
•
The set color is indicated in the box beside the RGB scale.
• Push[F-3•Ω ≈] to select R (Red), G (Green) and B (Blue),
and then rotate the main dial to set the ratio from 0 to 255.
Set the text color in the TX buffer screen.
•ThecolorissetinRGBformat.
•
The set color is indicated in the box beside the RGB scale.
• Push[F-3•Ω ≈] to select R (Red), G (Green) and B (Blue),
and then rotate the main dial to set the ratio from 0 to 255.