Icom IC-GM800 - D Receiving a Distress Acknowledgement

58
2001 NEW
7
7
DSC OPERATION
8
9
10
11
12
13
14
15
16
17
6
5
4
3
2
1
Quick Reference
8. Select your desired Individual ID, or “Manual
Input.” (Example: STATION A)
NOTE: When you select “Manual Input” in
this step, push the keypad to manually enter your
desired Individual ID.
9. Push [Call] to send the Relay call.
10. Push [Standby Mode]
to return to the
Standby mode.
TIP: See page 36 for details of sending an
acknowledgement.
TIP: When you push [Pause] in step 2, the
countdown will be paused. Push [Resume] to
restart the countdown.
Rotate
+
Push
CH/GRP
D Receiving a Distress acknowledgement
1. When a Distress Acknowledgement is received:
• Alarm sounds.
• The following screen is displayed and the backlight
blinks.
• “
” is displayed.
Push [Alarm Off] .
2. Push [Close Call RCVD Window] .
InformationL
• The communication frequency is automatically
selected. Monitor it, because a coast station may
require assistance.
• Rotate [CH/GRP] to con rm the call contents.
• See page 29 for details of the software key functions
in the DSC Task mode.
3. Push [Standby Mode] to return to the
Standby mode.
Push
any
Push
any