Icom IC-GM800 - Received Call Log; D Distress Message; D Other Messages; Transmitted Call Log

69
2001 NEW 2001 NEW
DSC OPERATION
7
■ Received Call log
The transceiver automatically stores up to 50 distress
messages and 50 other messages, and they can be
used as a supplement to your logbook.
InformationL
Software key functions in the RECIEVED CALL
LOG screen:
[Exit]: Push to return to the Main screen.
[Back]: Push to return to the previous screen.
[Print]: Push to print out the selected message when a
printer is connected to the transceiver.
[Enter]: Push to go to the next screen.
[Delete]: Push to delete the selected message.
NOTE:
• When there is an unread DSC message, “ ” blinks on
the information area of the LCD.
• The Distress messages are stored in “Distress.”
• “
” is displayed when there are unread DSC
messages.
• “
” is displayed when there are no unread DSC
messages.
• No icon is displayed when there are no DSC messages.
D Distress message
1. Push [DSC Log] to display the RECIEVED
CALL LOG screen.
2. Select “Distress,” then push [ENT].
3. Select your desired item.
4. Rotate [CH/GRP] to confirm the message
contents.
5. Push [Standby Mode] to return to the
Standby mode.
D Other messages
1. Push [DSC Log] to display the RCVD CALL
LOG screen.
2. Select “Others,” then push [ENT].
3. Select your desired item.
4. Rotate [CH/GRP] to confirm the message
contents.
5. Push [Standby Mode] to return to the
Standby mode.
Rotate
+
Push
CH/GRP
Rotate
+
Push
CH/GRP
■ Transmitted Call log
1. Push [MENU].
2. Select “Transmitted Call Log.”
(DSC Log > Transmitted Call Log)
3. Select your desired item.
4. Rotate [CH/GRP] to confirm the message
contents.
5. Push [Standby Mode] to return to the
Standby mode.
Rotate
+
Push
CH/GRP
Rotate
+
Push
CH/GRP
The transceiver automatically stores up to
50 transmitted calls, and the logs can be used as a
supplement to your logbook.
InformationL
Software key functions in the TRANSMITTED
CALL LOG screen:
[Exit]: Push to return to the Main screen.
[Back]: Push to return to the previous screen.
[Print]: Push to print out the selected message when
a printer is connected to the transceiver.
[Enter]: Push to go to the next screen.
[Delete]: Push to delete the selected message.