Icom IC-GM800 - DSC Adress ID; D Entering a Group ID

25
2001 NEW 2001 NEW
DSC OPERATION
7
D Entering a Group ID
1. Push [MENU].
2. Select “DSC Settings.”
3. Select “Group ID.”
4. Push [Add] .
5. Select “Address.”
6. Enter a 9 digit Group ID.
After entering, push [▲], [▼], [◄], or [►] to select
“Done” and push [ENT].
L The  rst digit is speci ed as ‘0’ for a Group ID.
L The  rst 2 digits are ‘0’ for any Coast station ID.
7. Select “Call Frequency.”
8. Enter an RX frequency.
After entering, push [▲], [▼], [◄], or [►] to select
“Done” and push [ENT].
9. Enter a TX frequency.
After entering, push [▲], [▼], [◄], or [►] to select
“Done” and push [ENT].
Rotate
+
Push
CH/GRP
Rotate
+
Push
CH/GRP
Push
Rotate
+
Push
CH/GRP
Push
+
Rotate
to select
a character
CH/GRP
Rotate
+
Push
CH/GRP
Push
+
Rotate
to select
a character
CH/GRP
Push
+
Rotate
to select
a character
CH/GRP
■ DSC adress ID