Icom IC-GM800 - Advanced Connections

79
2001 NEW 2001 NEW
CONNECTIONS AND INSTALLATION
9
■ Basic connections
HS-98
Remote
controller
Ground
(p. 81)
Ground
(p. 81)
Ferrite EMI lter
(p. 82)
24 V
battery
[DC ISOLATE]
GM800
main unit
AT-141
HF antenna
(for DSC reception)
SP-24E
( Purchase
separately)
■ Advanced connections
• When a PC is connected, the PC has priority over
the remote controller.
• When a PC is connected, you cannot use the
remote controller after the set time period. Ask your
dealer for details.
• When a PC is connected, operating the PC
automatically updates settings on the remote
controller.
Position and
UTC time data
IEC61162-1 Ed.4 (2010-11)
AF/MOD
600Ω ground free line
Remote controller*
IEC61162-1 Ed.4 (2010-11)
Printer
(IBM
®
centronics or
compatible)
24 V
battery
* Connect to a PC through an
RS-422A cable (D-sub 9-pin) for
remote control.
NOTE for a remote controller:
If the initial connection does not work,
try reversing the wire connections. The
RS-422A’s pin assignments may differ,
depending on the manufacturer.
See pages 87 and 88 for connector
information details.