Icom IC-GM800 - D Receiving a Distress Cancel Call; D Receiving a Distress Relay Call

59
2001 NEW 2001 NEW
7
DSC OPERATION
■ Receiving DSC calls
D Receiving a Distress Cancel call
1. When a Distress Cancel call is received:
• Alarm sounds.
• The following screen is displayed and the backlight
blinks.
• “
” is displayed and “ ” blinks.
Push [Alarm Off] .
2. Select your desired action.
L To send an acknowledgement, push [Accept] .
[Hold]: Push [Hold] to return to the Main
screen.
[Pause]: Push [Pause] to pause the
countdown.
[Accept]: Push [Accept] to enter the DSC
Task mode.
InformationL
• The communication frequency is automatically
selected. Monitor it, because a coast station may
require assistance.
• Rotate [CH/GRP] to conrm the call contents.
• See page 29 for details of the software key functions
in the DSC Task mode.
3. Push [Standby Mode] to return to the
Standby mode.
TIP: When you push [Pause] in step 2, the
countdown will be paused. Push [Resume] to
restart the countdown.
D Receiving a Distress Relay call
1. When a Distress Relay call is received:
• Alarm sounds.
• The following screen is displayed and the backlight
blinks.
• “
” is displayed and “ ” blinks.
Push [Alarm Off] .
2. Select your desired action.
LTo send an acknowledgement, push [Accept] .
[Hold]: Push [Hold] to return to the Main
screen.
[Pause]: Push [Pause] to pause the
countdown.
[Accept]: Push [Accept] to enter the DSC
Task mode.
Push
any
Push
any