Icom IC-GM800 - D Receiving a Test Acknowledgement; D Receiving a Medical Transports Call

67
2001 NEW 2001 NEW
DSC OPERATION
7
■ Receiving DSC calls
D Receiving a Test acknowledgement
1. When a Test acknowledgement is received:
• Alarm sounds.
• The following screen is displayed and the backlight
blinks.
• “
” is displayed.
Push [Alarm Off] .
2. Push [Close Call RCVD Window] .
• Rotate [CH/GRP] to conrm the call contents.
• See page 29 for details of the Software key functions
in the DSC Task mode.
3. Push [Standby Mode] to return to the
Standby mode.
D Receiving a Medical Transports call
1. When a Medical Transports call is received:
• Alarm sounds.
• The following screen is displayed and the backlight
blinks.
• “
” is displayed and “ ” blinks.
Push [Alarm Off] .
2. Select your desired action.
[Hold]: Push [Hold] to return to the Main
screen.
[Pause]: Push [Pause] to pause the
countdown.
[Accept]: Push [Accept] to enter the DSC Task
mode
.
InformationL
• Monitors the communication frequency specied by
the calling station for an announcement from the
calling station.
• Rotate [CH/GRP] to conrm the call contents.
• See page 29 for details of the Software key functions
in the DSC Task mode.
3. Push [Standby Mode] to return to the
Standby mode.
Push
any
Push
any
Push
any