Icom IC-GM800 - D Setting the Medical Transports Item Display Option; D Setting the Ships and Aircraft Item Display Option; D Distress Scanning Receiver

72
2001 NEW
7
7
DSC OPERATION
D Setting the “Medical Transports” item
display option
You can select whether or not the “Medical
Transports” item is displayed in the COMPOSE NON-
DISTRESS screen.
1. Push [MENU].
2. Select “Medical Transports,” then push [ENT].
(DSC Settings > Medical Transports)
3. Select an option, then push [ENT].
• On: Displayed in the COMPOSE NON-DISTRESS
screen.
• Off: Not displayed in the COMPOSE NON-DISTRESS
screen. (Default)
4. Push [MENU] to return to the Main screen.
D Setting the “Ships and Aircraft” item
display option
You can select whether or not the “Ships and Aircraft”
item is displayed in the COMPOSE NON-DISTRESS
screen.
1. Push [MENU].
2. Select “Ships and Aircraft,” then push [ENT].
(DSC Settings > Ships and Aircraft)
3. Select an option, then push [ENT].
• On: Displayed in the COMPOSE NON-DISTRESS
screen.
• Off: Not displayed in the COMPOSE NON-DISTRESS
screen. (Default)
4. Push [MENU] to return to the Main screen.
D Distress Scanning Receiver
You can turn the Distress Scanning Receiver function
ON or OFF on each Emergency frequency.
NOTE: You cannot turn OFF the function on
2187.5 kHz and 8414.5 kHz, and 1 of the remaining
4 frequencies.
1. Push [MENU].
2. Select “Distress Scanning Receiver,” then push
[ENT].
(DSC Settings > Distress Scanning Receiver)
3. Select a frequency then push [ENT].
4. Select an option, then push [ENT].
• On: The Emergency frequency is scanned during the
Distress scan.
• Off: The Emergency frequency is skipped during the
Distress scan.
5. Push [MENU] to return to the Main screen.