Icom IC-GM800 - Sending a Non-Distress Calls; D Sending an Individual Call

43
2001 NEW 2001 NEW
DSC OPERATION
7
■ Sending a Non-Distress calls
D Sending an Individual call
The Individual call function enables you to transmit
a DSC signal to only a speci c coast station or ship.
After transmission, wait for an acknowledgement from
the receiving station.
You can communicate by voice after receiving the
acknowledgement ‘ACK (able).’
1. Push [Compose Non-Distress] .
 To display the screen from the Menu screen:
([MENU] >
Compose Non-Distress)
2. Select “Address.”
3. Select an Individual address, or “Manual Input.”
(Example: STATION A)
NOTE: When you select “Manual Input” in
this step, push the keypad to manually enter an
Individual ID.
4. Select “Category.”
5. Select an option.
(Example: Routine)
Information
When you have manually entered an Individual ID,
push the keypad to select the DSC call frequency.
1. Select “Call Frequency.”
2. Select a DSC call frequency, or “Manual Input.”
(Example: INTER2-1)
NOTE: When you select “Manual Input” in this
step, push the keypad to manually enter the DSC
call frequency.
Push
Rotate
+
Push
CH/GRP
Rotate
+
Push
CH/GRP
Rotate
+
Push
CH/GRP
Rotate
+
Push
CH/GRP
Rotate
+
Push
CH/GRP
Rotate
+
Push
CH/GRP