Icom IC-GM800 - D Sending a Distress Cancel Call

34
2001 NEW
7
8
9
10
11
12
13
14
15
16
17
1
2
3
4
5
6
Quick Reference
7
DSC OPERATION
D Sending a Distress Cancel call
You can send the Distress Cancel call while
transmitting a Distress call or while waiting for a
Distress Acknowledgement.
While transmitting a Distress call:
1. While transmitting a Distress call push
[Cancel]
.
2. Confirm the content and push [Continue] .
 The frequencies that you have to send voice cancel
messages are displayed.
(Example: 2/4/8/12/16 MHz)
 To cancel the Distress Cancel call, push [Back] .
3. After sending, the following screen is displayed.
Push [Select FREQ] .
4. Select a frequency to send a voice cancel
message and push [ENT].
 The check mark shows that the Distress call on the
selected frequency is canceled by sending voice
cancel message.
5. Hold down [PTT] to announce your situation.
 You can conrm the statement of the Distress
Cancel call by rotating [CH/GRP].
6. Repeat steps 3 to 5 to cancel for all frequencies.
7. After sending a voice cancel message for all
frequencies, [Finish] is displayed.
Push [Finish] .
8. Push [Standby Mode] to return to the Main
screen.
Push
Push
Push
Rotate
+
Push
CH/GRP
Push
Push
► Continued on the next page.