Icom IC-GM800 - D Sending a Position Request Call

50
2001 NEW
7
7
DSC OPERATION
8
9
10
11
12
13
14
15
16
17
1
2
3
4
5
6
Quick Reference
D Sending a Position Request call
Send a Position Request call when you want to know
a speci c ship’s current position, and so on.
1. Push [Compose Non-Distress] .
 To display the screen from the Menu screen:
([MENU] >
Compose Non-Distress)
2. Select “Message Type.”
3. Select “Position.”
4. Select “Address.”
5. Select an Individual ID, or “Manual Input.”
(Example: STATION A)
NOTE: When you select “Manual Input” in
this step, push the keypad to manually enter an
Individual ID.
6. Select “Call Frequency.”
7. Select an option. (Example: 8414.5 kHz)
8. Push [Call] to send the Position Request call.
► Continued on the next page.
Push
Rotate
+
Push
CH/GRP
Rotate
+
Push
CH/GRP
Rotate
+
Push
CH/GRP
Rotate
+
Push
CH/GRP
Rotate
+
Push
CH/GRP
Rotate
+
Push
CH/GRP
Push