Icom IC-GM800 - D Receiving a Group Call

63
2001 NEW 2001 NEW
DSC OPERATION
7
■ Receiving DSC calls
D Receiving an Individual acknowledgement
(continued)
When receiving “ACK (New CH)”:
1. When an Individual acknowledgement “ACK
(New CH)” is received:
• Alarm sounds.
• The following screen is displayed and the backlight
blinks.
• “
” is displayed.
Push [Alarm Off] .
2. Push [Close Call RCVD Window] .
InformationL
• Automatically selects the communication frequency
that specied by the called station.
• Rotate [CH/GRP] to conrm the call contents.
• See page 29 for details of the software key functions
in the DSC Task mode.
3. Hold down [PTT] to communicate.
4. Push [Standby Mode] to return to the
Standby mode.
D Receiving a Group call
NOTE: To receive a Group call, push [D-SCAN] to
enter the DSC watch mode.
1. When a Group call is received:
• Alarm sounds.
• The following screen is displayed and the backlight
blinks.
• “
” is displayed and “ ” blinks.
Push [Alarm Off] .
2. Select your desired action.
[Hold]: Push [Hold] to return to the Main
screen.
[Pause]: Push [Pause] to pause the
countdown.
[Accept]: Push [Accept] to enter the DSC
Task mode.
Push
any
Push
any
Push
any