Icom IC-GM800 - Dsc Operation; D Entering an Individual ID

2001 NEW
23
2001 NEW 2001 NEW
DSC OPERATION
7
■ DSC adress ID
D Entering an Individual ID
1. Push [MENU].
2. Select “DSC Settings.”
3. Select “Individual ID.”
4. Push [Add] .
5. Select “Address.”
6. Enter a 9 digit Individual ID.
After entering, push [▲], [▼], [◄], or [►] to select
“Done” and push [ENT].
L The  rst digit is speci ed as ‘0’ for a Group ID.
L The  rst 2 digits are ‘0’ for any Coast station ID.
7. Select “Call Frequency.”
Rotate
+
Push
CH/GRP
Rotate
+
Push
CH/GRP
Push
Rotate
+
Push
CH/GRP
Push
+
Rotate
to select
a character
CH/GRP
Rotate
+
Push
CH/GRP
You can enter a total of 100 DSC address IDs, and
assign a name of up to 10 characters to each ID.
InformationL
Rotate
CH/GRP
: Rotate [CH/GRP] to select.
Push : Push [ENT] to enter or set.
Push : Push the keypad to enter digits or
text.
TIP: You can use the following key operations in the
Menu screen.
ACTION OPERATION
Select Rotate [CH/GRP]
Push [Ù] or [Ú]
Enter
Push [ENT], [CH/GRP],
or [Enter]
Cancel Push [CLR]
Exit
Push [Exit]