Icom ID-5100A

6
D-STAR OPERATION <BASIC>
6-24
“TO” (Destination) setting (Continued)
D Usingthe“LocalCQ”(LocalAreacall)
When “Local CQ” is selected in the “TO SELECT”
screen, “CQCQCQ” is set in “TO.”
Example: Making a Local area call by accessing the
“Hirano” repeater.
Touch [DR]. q
Check whether or not “TO” is selected. w
• If “TO” is not selected, touch the “TO” eld.
Touch the “TO” field. e
• Opens the “TO SELECT” screen.
Touch “Local CQ.” r
• The transceiver returns to the DR screen, and “CQC-
QCQ” is displayed in “TO.”
D Usingthe“GatewayCQ”(Gatewaycall)
When “Gateway CQ” is selected in the “TO SELECT”
screen, you can select the repeater to make a gateway
call on the repeater list.
Example: Making a gateway CQ call to the “Hamacho”
(Japan) repeater from the “Hirano” repeater.
Touch [DR]. q
Check whether or not “TO” is selected. w
• If “TO” is not selected, touch the “TO” eld.
Touch the “TO” field. e
• Opens the “TO SELECT” screen.
Touch “Gateway CQ.” r
• Opens the “REPEATER GROUP” screen.
Touch the repeater group where your destination re- t
peater is listed. (Example: “11: Japan”)
Touch the destination repeater. y
(Example: “Hamacho”)
• The transceiver returns to the DR screen, and “Hama-
cho” is displayed in “TO.”
Previous view