Icom ID-5100A - Bluetooth Set Items; Vox Delay

12
MENU SCREEN
12-64
BluetoothSetitems
The optional UT-133 Bluetooth
®
u n i t is required.
Bluetooth (Default:OFF)
Bluetooth Set > Bluetooth
Turns the Bluetooth
®
function ON or OFF.
To use the Bluetooth
®
function the optional UT-133 Blu-
etooth
®
u n i t is required.
• OFF: Turns OFF the function.
• ON: Turns ON the function.
AutoConnect (Default:ON)
Bluetooth Set > Auto Connect
Select whether or not to automatically connect to the
paired Bluetooth
®
device when its power is turned ON.
• OFF: Does not connect to the paired device.
• ON: Automatically connects to the last connected
device.
Paring/Connect
Bluetooth Set > Paring/Connect
Select to search for the Bluetooth
®
device to connect,
or view the paired Bluetooth
®
devices in the list.
See page 15-6 for details.
<<ParingReception>>
Bluetooth Set > <<Paring Reception>>
Select to indicate to Bluetooth
®
devices you can accept
paring requests.
See page 15-12 for details.
AF Output (Default:HeadsetOnly)
Bluetooth Set > Headset Set > AF Output
Select the AF Output device when a Bluetooth
®
head-
set is connected.
• Headset Only: Outputs audio to only the con-
nected Bluetooth
®
headset.
• Headset & Speaker: Outputs audio to both the con-
nected Bluetooth
®
headset and
the transceiver’s speaker.
VOX (Default:OFF)
Bluetooth Set > Headset Set > VOX > VOX
The VOX (Voice Operated Transmission) function starts
transmitting without pushing [PTT] when you speak into
the microphone, then automatically returns to receive
when you stop speaking.
• OFF: Turns OFF the function.
• ON: Turns ON the function.
NOTE: To use the function, the optional VS-3 Blue-
tooth
®
h e a d s e t is required.
VOX Level (Default:5)
Bluetooth Set > Headset Set > VOX > VOX Level
Set the VOX gain level between OFF, 1 (minimum sen-
sitivity) and 10 (maximum sensitivity).
Higher values make the VOX function more sensitive
to your voice.
To turn OFF the VOX function, set to the “0” position.
NOTE: Before setting the VOX gain level, it is recom-
mended that you set the microphone gain level in
“Function” of the Menu screen or the Bluetooth
®
headset.
VOX Delay (Default:0.5sec)
Bluetooth Set > Headset Set > VOX > VOX Delay
Set the VOX Delay time to 0.5, 1.0, 1.5, 2.0, 2.5 or 3.0
seconds.
The VOX Delay is the amount of time the transmit-
ter stays ON after you stop speaking, before the VOX
switches to receive.
VOXTime-OutTimer (Default:3min)
Bluetooth Set > Headset Set > VOX >
VOX Time-Out Timer
Set the VOX Time-Out Timer to 1, 2, 3, 4, 5, 10 or 15
minutes to prevent an accidental prolonged transmis-
sion.
If a continuous transmission exceeds the set period,
the transmission will be cut off.
To disable the function, set it to “OFF.”
Previous view