Icom ID-5100A

3
MEMORY OPERATION
3-13
You can enter an alphanumeric name for each Memory,
including Call channels, and Banks.
Names can be a maximum of 16 characters.
D EnteringaMemoryname
Touch the Function group icon one or more times. q
• Selects the F-1 menu.
Touch [MW]. w
Touch [Manage Memory]. e
• Open the “MANAGE MEMORY” screen.
Touch “Memory CH.” r
Touch “ALL.” t
• Displays the “MEMORY CH ALL” screen.
Touch the Memory channel to enter a name, for 1 y
second.
Touch “Edit.” u
• Displays the “MEMORY CH EDIT” screen.
Touch “NAME.” i
• Enters the name edit mode.
EnteringaMemoryorBankname
Touch the keypad. o
• Enters the desired character or symbol.
• In the Alphabet entry mode, touch “” to enter an upper
case letter once, or touch “
” to continuously enter upper
case letters. Touch “
” to enter lower case letters.
• Touch [[ab]] or [[12]], and then touch [ab], [12] or [(!"#)] to
select the desired entry mode.
Entry mode
setting window
• Touch “ab⇔12” to toggle between the Alphabet entry and
Number entry modes.
• Touch “SPACE” to enter a space.
• Touch [CLR] to delete the selected character, symbol or
number.
• Touch [QUICK], and then touch “Switch to Tenkey” to
switch the keyboard type.
Selectablecharactersandsymbols
A to Z, a to z, 0 to 9, ! " # $ % & ’ ( ) * + ,
- . / : ; < = > ? @ [ \ ] ^ _ ` { | } ˜ (space)
!0 Touch [] to move the cursor backwards, or touch
[] to move the cursor forwards.
!1 Repeat steps o and !0 to enter a name of up to 16
characters, including spaces.
!2 After entering, touch [ENT].
!3 Touch “<<Overwrite>>,” and then touch [YES].
• Writes the entered name to the channel.
Previous view