Icom ID-5100A

10
VOICE MEMORY
10-2
RecordingaQSOaudio
Recording a QSO audio using the MAIN band.
NOTE:
Be sure to insert an SD card into the transceiver be-
fore recording the audio.
D Tostartingtorecord
Touch [QUICK]. q
Touch “<<REC Start>>.” w
• Enters to the Recording Standby mode.
Appears
Appears
Blinks
Standby mode
Recording
Starts to record when the squelch opens.
• Recording pauses while no signal is received, and re-
sumes when a signal is received again.
• Recording continues until you manually stop recording,
or the card becomes full.
• If the recording le’s content reaches 2GB, the transceiver
automatically creates a new file, and continues recording.
D Tostoprecording
Touch [QUICK]. q
Touch “<<REC Stop>>.” w
• The transceiver displays “Recording stopped,” and auto-
matically exits the Quick Menu screen.
Foryourreference:
When the PTT Automatic Recording function is set to
ON, the recording automatically starts when “<<REC
Start>>” is touched. (In this case, recording continues
even while no signal is received.)
See page 12-17 for the setting details.
NOTE:
Once the recording has started, it will continue, even
if the transceiver is rebooted.
Foryourreference:
When touching either the “
” or “ ” icons, the “Stop
recording?” dialog box appears. Touching [YES] also
stops the recording.
Previous view