8
GPS OPERATION
8-2
GPSoperation
The transceiver has a built-in GPS receiver. You can
check your current position, and transmit GPS data in
the DV mode.
D GPSreceivesetting
Check whether or not the GPS receiver is receiving
your position.
The GPS icon blinks when searching for satellites.
➪ ➪ ➪
The GPS icon stops blinking when the minimum
number of required satellites are found.
• It may take only a few seconds to receive. But de-
pending on the environment, it may take a few min-
utes. If you have difficulties receiving, we recommend
that you try a different location.
• When “GPS Select” item is set to “Manual,” the icon
does not appear.
(GPS > GPS Set > GPS Select)
To Next Page
Loading...
