Icom ID-5100A

12
MENU SCREEN
12-43
MyStationitems
MyCallSign
My Station > My Call Sign
The transceiver has a total of 6 memories to store your
own call signs.
A call sign of up to 8 digits can be entered.
Also, a note of up to 4 characters, for operating radio
type, area, and so on, can be entered.
• See page 6-5 for MY call sign programming.
• To select a different My Call Sign, touch the desired
call sign to set.
TXMessage
My Station > TX Message
The transceiver has a total of 5 memories to store
short messages for simultaneous transmission in the
DV mode.
Enter a message of up to 20 alphanumeric characters
for each memory.
• See page 7-2 for TX message entry.
• To changing the TX Message, touch the desired
message to select it.
• When no message transmission is desired, select
“OFF.”
Previous view