Icom ID-5100A

12
MENU SCREEN
12-41
DVMemoryitems
YourCallSign
DV Memory > Your Call Sign
The transceiver has a total of 200 memories to store an
individual station destination call sign.
The stored call sign and name are displayed on the
“YOUR CALL SIGN” or “RX HISTORY” screen.
• The Your (UR) Call Sign can be programmed to the
memory using the RX History. (p. 6-26)
• See pages 7-32 to 7-35 about how to add, edit or
move the Your Call Sign in the memory.
Repeater List
DV Memory > Repeater List
You can store repeater information for quick and simple
communication when using repeaters.
The transceiver has a total of 1200 repeater memory
channels, storable in 30 groups (01 to 30).
NOTE:
For easy operation, a repeater list is preloaded into
your transceiver. However, if the CPU clears all pro-
grammed contents (All Reset), the repeater list is
also cleared.
We recommend that memory data be backed up us-
ing an SD card, or be saved to a PC using the CS-
5100 cloning software.
About the repeater list:
The repeater list can be downloaded from the Icom
website.
http://www.icom.co.jp/world/support/download/firm/in-
dex.html
Repeater Group (01 to 30)
Group name
Repeater group name of up to 16 alpha-
numeric characters
The Skip setting can be turned ON or OFF in the Quick Menu
screen.
Repeater List
<DV Repeater>
TYPE DV Repeater
NAME
Repeater name of up to 16 alphanumer-
ic characters
SUB NAME
Repeater sub name of up to 8 alphanu-
meric characters
CALL SIGN Repeater call sign
GW CALL SIGN Gateway call sign
GROUP
Repeater group where the repeater is
assigned
USE(FROM)
Select whether or not to use the repeat-
er as an access repeater (FROM) in the
DR screen
FREQUENCY
Operating frequency of the access re-
peater
DUP
Duplex setting to use the access re-
peater
OFFSET FREQ
Frequency offset to use the access re-
peater
POSITION
Position data accuracy level (“None,”
“Approximate” or “Exact”)
LATITUDE* Latitude position of the repeater
LONGITUDE* Longitude position of the repeater
UTC OFFSET
Time difference between UTC (Universal
Time Coordinated) and the local time
NOTE:When the repeater is used for a simplex com-
munication, refer to the list below to set the set-
tings.
<DVSimplex>
TYPE DV Simplex
NAME
Enter the desired name of up to 16 al-
phanumeric characters
SUB NAME
Enter the desired sub name of up to 8
alphanumeric characters
GROUP Set the desired repeater group
USE(FROM)
Select whether or not to use the repeat-
er as an access repeater (FROM) in the
DR screen
FREQUENCY Frequency to operate simplex
POSITION
Position data accuracy level (“None,”
“Approximate” or “Exact”)
LATITUDE* Latitude position of the access point
LONGITUDE* Longitude position of the access point
UTC OFFSET
Time difference between UTC (Universal
Time Coordinated) and the local time
* Appears when POSITION is set to “Approximate” or “Ex-
act.”
Previous view